As an Amazon Associate I earn from qualifying purchases.
Oudtinz Steel Bench Block 4"x4" Flat Anvil Jewelers Tool Metal Bench Block for Jewelry & Stamping 4''x4''x1/2''Oudtinz
- Hardened, all surfaces smoothly polished, and chamfered to avoid sharp edges. Made of p20 solid steel for resistance to dents and scratches.
A basic and necessary tool set for jewelry making, metal stamping and gunsmith jobs. Dimensions: 4" x 4" x 1/2" thick. Portable and convenient work surface.
2. Shenzhen Chengyida E-Commerce Co., Ltd.
Flat Anvil Jewelers Tool for Jewelry Stamping, CHENGYIDA 1 piece 63x63x30mm Solid Metal Bench Block Steel Bench Block Wire Hardening and Wire Wrapping Tool,Jewelry Making ToolShenzhen Chengyida E-Commerce Co., Ltd.
- Made of solid high carbon steel for resistance to dents and scratches. Measurements: 63x63x30mm ; 2. 48"x2. 48"x1. 18". All surfaces are ground flat, hardened, and smoothly polished. Qty: 1pC. For chasing, flattening, shaping, laying out, and stamping metal and other hard material.
3. Shenzhen Chengyida E-Commerce Co., Ltd.
Flat Anvil Jewelers Tool for Jewelry Stamping, CHENGYIDA 1 piece 50x50x30mm Solid Metal Bench Block Steel Bench Block Wire Hardening and Wire Wrapping Tool,Jewelry Making ToolShenzhen Chengyida E-Commerce Co., Ltd.
- Qty: 1pC. All surfaces are ground flat, hardened, and smoothly polished. Measurements: 50x50x30mm/2"X2"X1. 18". Made of solid high carbon steel for resistance to dents and scratches. For chasing, shaping, flattening, laying out, and stamping metal and other hard material.
4. F Fityle
Jewelry Making Work Surface Hardened Metal Anvil Tool, F Fityle Steel Bench Block Square Hammer StampF Fityle
- Used when flattening or Stamping Sheet Metal and wire. Material: Stainless Steel. This steel block is used by Jewelers in fabricating parts and design work, metal working and crafts.
Size: approx. 64 x 64 x 20 mm / 2. 5 x 2. 5 x 08 inch. Applications: jewelry making, bead & Wire Work, Metal Smiths, Hobby & Crafts, Leather work, Watchmakers.
5. Shenzhen Chengyida E-Commerce Co., Ltd.
Flat Anvil Jewelers Tool for Jewelry & Stamping, CHENGYIDA 1 piece 30x30x30mm Steel Bench Block,Solid Metal Bench Block Wire Hardening and Wire Wrapping Tool,Jewelry Making ToolShenzhen Chengyida E-Commerce Co., Ltd.
- For chasing, flattening, shaping, laying out, and stamping metal and other hard material. Made of solid high carbon steel for resistance to dents and scratches. Qty: 1pC. All surfaces are ground flat, hardened, and smoothly polished. Measurements: 30x30x30mmmm ;1. 18"x1. 18"x1. 18".
Metal Leather Stamping Kit for Jewelry Making Numbers Alphabet Stamp Punch Hammer Steel Bench Block Imprinting Punch Tools 1PCS Steel Bench BlockVIGAN
- Used for metal stamping blanks/ jewelry tags, And For Flattening, Laying-Out, Shaping, Chasing, Shaping And Stamping Metal. The steel part is Mirror Finished And Chrome Plated. The handle of the hammer provides Better Grip And Comfort, Easy To Hold.
The soft bottom helps reduce the force when Tapping, It Will Make The Patterns Or Letters That We Work More Perfect. The base is made of soft rubber And Wraps The Bottom Of The Steel Part.
BENCH ANVIL PIN CLAMP JEWELERS STEEL & WOOD BLOCK JEWELRY MAKING BENCH WORKBENCH LZ 3.1 FRENOVEL
- Will fit benches up to 2" 51 mm thick. Made out of wood and metal. Machined from a solid block of tool steel, not cast. This is a new bench pin.
|Weight||1.18 kg (2.6 Pounds)|
Wet and Dry Sanding Paper,Hoiny 30-Sheet 120 to 5000 Sandpaper,9 * 3.6"Abrasive Paper Sheets Black High Grit Sanding Paper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing.Hoiny
- Meet all kinds of sanding needs. Easy to use the grit of the sandpaper is printed on the back for easy identification. Wide range of usethe abrasive papers are widely used in art and craft, metal, plastic applications, wood furniture, glass finishing and car polishing, automotive metal polishing, drywall sanding and more buffing/polishing works.
The size of the buffing sandpaper is 23 x 9 cm, it can also be easily cut into any smaller size you need.
Better water resistancemade of waterproof silicon carbide, suitable for dry / wet grinding, does not decompose, the electroplating ensures evenly distributed gravel, crack or break during use.
Sandpaper set each grit contains 2 pieces, 120/150/180/240/320/400/600/800/1000/1200/1500/2000/2500/3000/5000 with a total of 30 pieces. For wet and dry usethese sandpaper are made of waterproof silicone carbide, the sandpapers are great for both dry and wet sanding.
Silver, DXLing 10 Pieces Round Steel Hollow Punch Set 1 mm to 10 mm Different Sizes Leather Craft Hollow Hole Punch Cutter Tools for Watch Band Gasket Belt Strap Shoe Fabric Canvas Clothes EyeletDXLing
- Packaging -- you will get 10 round steel hollow punches, 10mm, 2mm, including 10 different sizes, 1mm, 9mm, 1 piece of each size, 7mm, 6mm, 3mm, 8mm, 5mm, 4mm, different The size can meet your different needs.
Different styles of punches can produce unique artistic and aesthetic effects on leather. Easy to use -- just place the round hollow punch on the area where you need to punch, and then hit the back end firmly with a hammer or mallet.
Application -- the round hollow punching tool can be widely used for punching leather, straps, eyelets, fabrics, canvas, balsa wood, plastics, cardboard, shoes, jackets, etc.
Material -- the round hole punch is made of high steel, can make clean and precise holes, has a sharp round cutting edge, excellent wear resistance and durability, and can be used for a long time. Design -- the design of the knurled body makes the hollow punch with good slip resistance and firm grip, which helps to hold the hollow punch firmly and is easy to identify, which can ensure safe use.
10. ele ELEOPTION
Ele ELEOPTION FOREDOM S-R Hanging Flexshaft Mill Jewelry Design&Repair Tools 6mm 220V 230Wele ELEOPTION
- Handle chuck 0-6mm high precision, suitable for high precision engraving, no heat, there feel and other characteristics, grinding, long life, polishing design.
Input voltage: 220v~240V, Power:230W. Note: that reversing the first switching off the motor motor reversing switch. The original crane hanging mill for grinding, full copper motor, no heat, electrical design reversing switch that can be adjusted according to the different needs of the motor rotation direction with stop motion stepless electronic foot switch, plastic production, motor housing thermal design, no leakage.
Speed: 0~18000rpm CVTAdjustable.