As an Amazon Associate I earn from qualifying purchases.
Wireless Connection Motherboard for Raspberry Pi Zero WH, Development BoardCHICIRIS
- 40pin gpio header: for raspberry pi zero WH motherboard with 40PIN pre soldered GPIO header, no soldering iron required. Multimedia interface: the mainboard has mini high definition multimedia interface and supports 1080p60 video output.
Included accessories: equipped with USB and Type‑C adapter, data cable, heat sink and screwdriver, easy to install and use.
Other functions: with composite video and reset title function, micro USB OTG interface, micro USB power supply and micro storage card slot. Wireless connections: The motherboard has WiFi and connection functions, with strong compatibility and good practicality.
Waveshare GamePi20 Mini Retro Video Portable Game Console for Raspberry Pi Zero/Zero W/Zero WH 2.0inch IPS Display 320x240 Pixels Onboard Speaker and Earphone JackRaspberry Pi Zero WH InsideWaveshare
- 2. 0inch ips display, 320x240 pixels. Onboard speaker and earphone jack, listen to the familiar BGM from the old days. The gamepi20 is a mini retro video game console based on Raspberry Pi Zero / Zero W / Zero WH, recalls you all the gaming pleasures in the memory.
Battery life indicator. Immersion gold process, carefully crafted. Raspberry pi zero wh inside, small size, yet powerful. Note: assembled before shipping. Integrates battery charge circuitry, powered from 14500 lithium battery, high quality material, plays anywhere anytime.
|Weight||0.13 kg (0.29 Pounds)|
|Part Number||GamePi20 -1|
3. PI PISUGAR
Pisugar2 Portable 1200 mAh UPS Lithium Battery Power Module for Raspberry Pi-Zero W/WH Model Accessories Not Include Raspberry PiPI PISUGAR
- Easy to install: install in 10 secs. No soldering required. On-board rtc: provide real-time time for the system, and realize timing startup function.
Perfect size: the standard dimension of raspberry pi zero. Customer button: custom any function with the sh command line. You can easily put your prototypes in our open-source 3D print cases.
Visual management interface: Check battery status and setting advanced features easily. Easy, and graceful. Use small test-pad to supply power, does not occupy any GPIO of Raspberry Pi, can be used both with or without GPIO header. Short click /double click /long click can be set independently.
IBest Mini 2-DOF pan-tilt HAT Kit with Micro Servos for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allow Pi to control Camera Movement and Sense Light Intensity with I2C InterfaceIBest
- I2c interface, only 2 pins are required for moving and light intensity sensing. 2-dof pan-tilt hat for raspberry pi zero/Zero W/Zero WH/2B/3B/3B+.
Comes with development resources and manual demo code, assembly guide. Onboard pca9685 chip, provides 12-bit resolution pwm signal for moving control, Onboard TSL2581FN light-to-digital converter, with embedded adc, provides a value that approximates the human eye response to assist the module.
Onboard voltage level translator, compatible with 3. 3v/5v operating voltage. Specific acrylic board to fix the Raspberry Pi camera, make it easy to install.
|Part Number||Pan-Tilt HAT Board|
|Model||Pan-Tilt HAT Board|
1x RJ45 Ethernet Port,3x USB Ports Compatible with USB2.0/1.1, IBEST Ethernet/USB HUB HAT B with Box for Raspberry Pi Zero/Zero W/Zero WH,Ethernet USB HUB HAT with Case, RedIBest
- Comes with two different lids, changing as you like. Eth-usb-hub-box is designed for raspberry Pi Zero, compatible with Zero series boards. 3x extended usb ports, compatible with usb 2. 0 / 1. 1. Incorporates rtl8152b ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation.
Angle rounded design, dull polish surface, "simple snap" case lid. Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH. Quality abs material, smooth hand feeling, anti-fingerprint.
|Weight||0.06 kg (0.13 Pounds)|
|Part Number||ETH USB HUB HAT B with Box|
|Model||ETH USB HUB HAT B with Box|
1x RJ45 Ethernet Port,3x USB 2.0 Ports,802.3af-Compliant, IBEST PoE Ethernet/USB HUB HAT with Box for Raspberry Pi Zero/Zero W/Zero WH,Power Over Ethernet USB HUB HAT with CaseIBest
- Comes with two different lids, changing as you like. Fully isolated smps switch mode power supply. 3x extended usb ports, compatible with USB 2. 0 / 1. 1. The poe-eth-usb-hub-box is designed for Raspberry Pi Zero, compatible with Zero series boards.
Angle rounded design, smooth hand feeling, dull polish surface, "simple snap" case lid. Quality aBS material, anti-fingerprint. Incorporates rtl8152b ethernet chip, with 10m / 100m auto-negotiation RJ45 port. Poe power over Ethernet feature, 802. 3af-compliant.
|Weight||0.09 kg (0.2 Pounds)|
|Part Number||PoE ETH USB HUB HAT with Box|
|Model||PoE ETH USB HUB HAT with Box|
RS485 CAN HAT for Raspberry Pi Zero W WH/4B/3B+/3B/2B/B+/A+, Allow Stable Long-Distance Communication, Transceiver SN65HVD230 and SP3485, Onboard CAN Controller MCP2515 via SPI InterfaceWaveshare
- Rs485 can hat for raspberry pi 4b/3b+/3b/2b/b+/a+/zero/zero w/wh, with standard Raspberry Pi 40PIN GPIO extension header. Onboard tvs transient voltage suppressor, effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic.
Reserved control pins, allows to work with other control boards, comes with development resources and manual examples in wiringPi/python.
Rs485 function, controlled via uart, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485. Can function, onboard can controller mcp2515 via SPI interface, onboard transceiver SN65HVD230 .
PoE Module HAT Ethernet USB HUB BOX Expansion Board Starter Kit for RPI 0W Raspberry Pi Zero 2 W 2W WH Extension Breakout CaseSTEMDIY
- Poe power over ethernet feature, 802. 3af-compliant, 3x extended USB ports, compatible with USB 2. 0 / 1. 1. By using this small hat and some proper 802. 3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports.
The hub hat is a poe power over ethernet USB HUB HAT designed for Raspberry Pi Zero. Note: raspberry Pi Zero board is NOT included.
Waveshare NB-IoT eMTC Edge GPRS GNSS Hat for Raspberry Pi Zero W WH 2B 3B 3B+ Based on SIM7000E Support GNSS positioning Onboard USB interface voltage translatorWaveshare
- Raspberry pi connectivity, mqtt, udp, sms, http, compatible with raspberry pi Zero/Zero W/Zero WH/2B/3B/3B+; Supports TCP, etc;supports gnss positioning gps, glonass, ftp, mail, ppp, BeiDou and Galileo.
Get it faster, please refer to b0bfHYWDFB to get the item which will be shipped from Amazon UK Warehouse. Onboard usb interface, and so on; breakout uart control pins, to test AT Commands, get GPS positioning data, to connect with host boards like Arduino/STM32.
Supports sim application toolkit: sat class 3, 27. 005, gsm 11. 14 release 98, easy to monitor the working status; Baudrate: 300bps~3686400bps; Control via AT commands 3GPP TS 27.
007, usat;comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. 2x led indicators, and simcom enhanced at commands. Onboard voltage translator, allows to be switched to 5V via 0Ω resistor; SIM card slot, 3. 3v by default, compatible with both normal SIM card and NB-IoT specific card.
|Weight||0.2 kg (0.44 Pounds)|
|Part Number||SIM7000E NB-IoT HAT|
|Model||SIM7000E NB-IoT HAT|
USB 3.2 Gen1 HUB HAT Purpose-made for Raspberry Pi 4,Compatible with Raspberry Pi 3 B+ 3 B 2B Zero Zero W Zero WH,4x USB 3.2 Gen1 Ports,Compatible with USB 3.0 / 2.0 /1.1,Driver-FreeIBest
- 4x usb 3. 2 gen1 ports, compatible with USB 3. 0 / 2. 0 /1. 1. Onboard external micro USB 5V DC power port, ensures more stable power supply. Purpose-made for raspberry pi 4, compatible with other Raspberry Pi version as well, like raspberry pi 3B+/3B/2B, Zero/Zero W/Zero WH.
Driver-free, compatible with OS including Windows, plug and play, mac os, Linux and Android. Comes with development resources and manual. 1x power indicator and 4x USB port indicators, easy to check the operating status.
|Weight||0.09 kg (0.2 Pounds)|
|Part Number||USB 3.2 Gen1 HUB HAT|
|Model||USB 3.2 Gen1 HUB HAT for Pi|