As an Amazon Associate I earn from qualifying purchases.1. Kreg
Kreg Tool Precision Router Table Insert Plate w/Level-Loc Rings Non predrilled PRS4038
Kreg - Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. Alignment marks make it easy to center and mount on almost any router. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch.
Comes without any predrilled mounting holes. 5mm phenolic insert plate. Level-loc Reducing Rings.
| Brand | Kreg |
| Manufacturer | Kreg |
| Height | 31.75 cm (12.5 Inches) |
| Length | 31.1 cm (12.24 Inches) |
| Weight | 0.07 kg (0.15 Pounds) |
| Width | 34.9 cm (13.74 Inches) |
| Part Number | PRS4038 |
| Model | PRS4038 |
2. Kreg
Black & Red, Kreg Tool PRS4034 Insert Plate w/Level-loc Rings predrilled Triton
Kreg - Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. With modification, hole pattern works for Porter-Cable 7500 Series. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch.
Alignment marks make it easy to center and mount on almost any router. Level-loc Reducing Rings. 5mm phenolic insert plate. Comes predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers.
| Brand | Kreg |
| Manufacturer | Kreg |
| Height | 3.3 cm (1.3 Inches) |
| Length | 34.16 cm (13.45 Inches) |
| Weight | 1.34 kg (2.95 Pounds) |
| Width | 30.73 cm (12.1 Inches) |
| Part Number | PRS4034 |
| Model | PRS4034 |
3. Kreg
KREG PRS3040 Router Table Insert Plate Leveler, As The Picture Shown, M
Kreg - Eight adjustable points of contact. Package Dimensions : 6. 9" l x 4. 6" w x 1. 1" h. Unique bottom-mount design. Four-corner lock-downs for stability. Locating tabs for easy installation. Eliminate need for supporting rabbet.
| Brand | Kreg |
| Manufacturer | Kreg |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.13 kg (0.28 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | PRS3040 |
| Model | PRS3040 |
4. JessEm
JessEm 02027 Router Plate corner levelling Pads for Kreg and Shop Made Tables
JessEm - Mounting and leveling hardware are included. Make your own table exactly the way you want and save! Consider buying the plate an routing template at the same time.
| Brand | JessEm |
| Manufacturer | JessEm |
| Height | 5.08 cm (2 Inches) |
| Length | 10.16 cm (4 Inches) |
| Width | 7.62 cm (3 Inches) |
| Part Number | 02027 |
5. Kreg
Kreg Tool PRS4036 Insert Plate w/Level-loc Rings predrilled for Bosch & Porter Cable
Kreg - Level-loc Reducing Rings. Comes w/ predrilled holes and mounting hardware to fit the Porter-Cable 690/890 Series, and Bosch 1617. Measures 9 1/4" x 11 3/4" 235mm x 298mm; 3/8" thick 9.
5mm phenolic insert plate. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch. Alignment marks make it easy to center and mount on almost any router.
| Brand | Kreg |
| Manufacturer | Kreg |
| Height | 3.18 cm (1.25 Inches) |
| Length | 34.16 cm (13.45 Inches) |
| Width | 30.73 cm (12.1 Inches) |
| Part Number | PRS4036 |
| Model | PRS4036 |
6. Trend
Black, Trend RTI/PLATE Router Table Insert Plate, 20.0 mm*438.0 mm*319.0 mm
Trend - Three hole sizes of 98mm, 68mm and 32mm in diameter, concentric rings and radial lines on underside of plate for easy centring of router. Plate is moulded with a slight crown for distortion free cuts.
Plate will require drilling by the user to suit the make and model or router to be fitted. A large rigid router table insert plate for incorporation into user-made router tables. Manufactured from Thermoset plastic with two concentric snap-in rings.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 2 cm (0.79 Inches) |
| Length | 43.8 cm (17.24 Inches) |
| Weight | 1 kg (2.2 Pounds) |
| Width | 31.9 cm (12.56 Inches) |
| Part Number | RTI/PLATE |
| Model | RTI/PLATE |
7. Wetrys
Wetrys 1 Pcs Universal Aluminum Router Table Insert Plate Trimming Machine Flip Board For Woodworking Benches Router Table Plate
Wetrys - Material--router plate insert made of red aluminum alloy, not easy to rust and long service life, wood trimming machine. Warm tip--this router table insert plate can be used in general electric routers.
You can refer to the sizes in the pictures and the distance between the holes of your electric router then choose the proper type you want. Applicable models--for universal makita rt0700c screw hole spacing 56*45*54. 3mm, ken, boda, albion, dongcheng, wORX screw hole spacing 70*60mm.
Wide use--multi-function insert plate, suitable for making its own boring and milling table, suitable for high-precision woodworking. It is easy to operate, save effort and expand the use of the trimming machine at the same time. Easy installation--a convenient center hole bushing that aligns the router so that it can centered on the drill hole. Drill and install router easily and accurately.
| Brand | Wetrys |
| Manufacturer | Aqing Sea |
| Weight | 0.01 kg (0.02 Pounds) |
| Part Number | ghfj35417 |
8. Kreg
KREG® Precision Router Table Lift
Kreg - Bearing-guided Carriage provides smooth operation. 3⁄8" x 9 1⁄4" x 11 3⁄4" 9. 5 mm x 235mm x 298mm hard-anodized aluminum plate won’t sag, resists scratches.
Allows precise above-the-table setup changes for table-mounted routers. Above-table collet access allows fast, easy, above-table bit changes. Fits all kreg router Tables and many competitive brands.
| Brand | Kreg |
| Manufacturer | Kreg |
| Height | 26.37 cm (10.38 Inches) |
| Length | 34.29 cm (13.5 Inches) |
| Weight | 0.45 kg (1 Pounds) |
| Width | 27.94 cm (11 Inches) |
| Part Number | PRS5000 |
| Model | PRS5000 |
| Warranty | 2 year manufacturer. |
9. AXABING
Trim Router Table Plate Woodworking Flip Trimming Board with 2 Aluminum Rings and Install Screws for Woodworking Bench Hole spacing: 70 x 62 mm, Red, Aluminum Router Table Insert Plate
AXABING - Products include a set of router table plate woodworking include: 1 Pc complete flip chip board; 2 Pieces round locating rings; 1 Pc stainless steel 5/8 axle sleeve; 1 Set of Install Screws. Make accurately drilling and mounting router easy.
Notethis router table insert plate can be used in general electric routers. You can refer to the sizes in the pictures and the distance between the holes of your electric router then choose the proper type you want. Materialthe aluminum router table is made of aluminum alloy including positioning ring, which is durable and not easily damaged.
Applicable modelsthe bench router is suitable for, boda, Ao Ben, boda, Rui Qi, wicks trimming machine, rui qi, Wicks trimming machine, Ao Ben, and most router machines.
Specifications: 235mm x 120mm x 8mm. Note: our products are not suitable for the makita router, trend router. Router table insert plate It is easy to operate, saves effort and expands the use of pruning machines at the same time. Make accurately drilling and mounting router easy. Suitable for Dongcheng, and most router machines. Feature convenient center hole bushing for aligning router router with drill center.
| Brand | AXABING |
| Manufacturer | AXABING |
| Height | 0.8 cm (0.31 Inches) |
| Length | 23.5 cm (9.25 Inches) |
| Width | 12 cm (4.72 Inches) |
10. Wetrys
Wetrys 1 Set Router Table Insert Plate Aluminium Alloy Wood Router Trimmer Engraving Machine Flip Board with 4 Rings for Woodworking Benches Flip Chip Board
Wetrys - Size--234*120*8mm/9. 2*4. 72*031inch. Safety--inverting your router in a router table allows for safer and more versatile operations. Convenient to use--threaded allen wrench inserts in each corner help you level and easily adjust the router insert with your table.
Wide use--work with the trimming machine for trimming deflashing, slotting, milling of woodworking. Material--the router table insert plate made of aluminum alloy, durable and not easy to rust.
| Brand | Wetrys |
| Manufacturer | Aqing Sea |
| Weight | 0.01 kg (0.02 Pounds) |
| Part Number | cfcg3216 |
Kreg - Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. Alignment marks make it easy to center and mount on almost any router. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch. Comes without any predrilled mounting holes. 5mm phenolic insert plate. Level-loc Reducing Rings.
Kreg - Eight adjustable points of contact. Package Dimensions : 6. 9" l x 4. 6" w x 1. 1" h. Unique bottom-mount design. Four-corner lock-downs for stability. Locating tabs for easy installation. Eliminate need for supporting rabbet.
Trend - Three hole sizes of 98mm, 68mm and 32mm in diameter, concentric rings and radial lines on underside of plate for easy centring of router. Plate is moulded with a slight crown for distortion free cuts. Plate will require drilling by the user to suit the make and model or router to be fitted. A large rigid router table insert plate for incorporation into user-made router tables. Manufactured from Thermoset plastic with two concentric snap-in rings.
Wetrys - Material--router plate insert made of red aluminum alloy, not easy to rust and long service life, wood trimming machine. Warm tip--this router table insert plate can be used in general electric routers.
Kreg - Bearing-guided Carriage provides smooth operation. 3⁄8" x 9 1⁄4" x 11 3⁄4" 9. 5 mm x 235mm x 298mm hard-anodized aluminum plate won’t sag, resists scratches. Allows precise above-the-table setup changes for table-mounted routers. Above-table collet access allows fast, easy, above-table bit changes. Fits all kreg router Tables and many competitive brands.
AXABING - Products include a set of router table plate woodworking include: 1 Pc complete flip chip board; 2 Pieces round locating rings; 1 Pc stainless steel 5/8 axle sleeve; 1 Set of Install Screws. Make accurately drilling and mounting router easy.
Wetrys - Size--234*120*8mm/9. 2*4. 72*031inch. Safety--inverting your router in a router table allows for safer and more versatile operations. Convenient to use--threaded allen wrench inserts in each corner help you level and easily adjust the router insert with your table. Wide use--work with the trimming machine for trimming deflashing, slotting, milling of woodworking. Material--the router table insert plate made of aluminum alloy, durable and not easy to rust.
