As an Amazon Associate I earn from qualifying purchases.
SPEEDFIT FLX26 22mm x 22mm x 300mm Flexible HoseSpeedfit
- 22mm push fit flexi pipe. Plastic plumbing fittings. This listing is for a Pack of 1. 22mm flexible tap connector push fit. Speedfit tap connector.
2X Lever Ball Valves 15mm Full Bore with Red & Blue Handle Compression Fitting Shut Off Iso Valve by PipestationPipestation
- 2 pack for hot / Cold pipes. Full bore for increased flow. Wras approved. Quick and simple isolation with quarter turn of Valve.
Pack of 2, Plumb-Pak PF257-2AMZ Compression Flexible Tap Connector 22mm x 3/4inch with an Isolator ValvePLUMB-PAK
- Washers Included. Built in isolating valve enables water supply to be shut off and on. For use where a rigid pipe is not suitable. Suitable for use with hot and cold water. Easy to install no specialist tools required.
4. LP Supplies
Packs of 2, Compression Flexible Tap Connectors 22mm x 3/4" BSP Hose Bath Tap Flex Connector 300mm LongLP Supplies
- 22mm compression fitting at one end and a 3/4" female bsp thread at the other. Easy to install no specialist tools required. Suitable for use with hot and cold water. 300mm / 30cm long and Supplied in Pairs. 22mm x 3/4 inch flexible Braided Bath Tap Connector Hoses.
|Height||2.5 cm (0.98 Inches)|
|Length||30 cm (11.81 Inches)|
|Weight||0.4 kg (0.88 Pounds)|
|Width||3.5 cm (1.38 Inches)|
Aumix x2 Pair 15mm x 3/4” inch 12mm Bore 300mm Flexible Braided Pipe Tap Connector Hose WRAS ApprovedAumix
- Wras approval is accepted by every water supplier in the UK. Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
This flexible braided Pipe Tap Connector Hose is perfect for connecting pipes to taps. You will receive x2 15mm x 3/4” inch 12mm Bore 300mm Flexible Tap Connectors.
One side is 15mm the other is ¾” inch with a 12mm bore with a length of 300mm made from Flexible Braided from the highest quality grade 304 long life stainless steel braided flexible hoses, which is highly durable.
If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. Wras approved - wras, which stands for water regulations advisory scheme, is a certification mark that demonstrates that an item or package complies with the high standards set out by water regulations.
6. Xcel Home
WRAS Approved | 500mm x 15mm Compression with Isolation Valve x 1/2" | Flexible Pipe Connector Stainless Steel Braided | x1 PipeXcel Home
- 15 bar max working pressure with 85°C max temp. 1 x xcel home wras approved 15mm compression with isolation valve x 1/2 BSP 500mm long flexi pipe connectors. Safe for water drinking. Isolation valve for easily turning on / off water supply without having to turn off mains.
Rust, corrosion and lead free. 304 long life stainless steel braided flexible hoses. Standard uk 1/2” bsp fitting for connecting 15mm male plumbing fittings. Large 10mm inner bore. Suitable for high pressure water systems. Compression fitting connects to 15mm copper pipe end.
JPGhaha 2 Pack 500mm Monobloc Hose Flexible Tap Connector Compressed Braided Supply Pipe Tail M10 x 1/2’’ BSP Stainless Steel for Kitchen Bath Universal ReplacementJPGhaha
- Premium material: the outer flexible tap pipe is made of high-quality 304 stainless steel, anti-rust, 8 strands of precision braided anti-leakage, compression and explosion-proof, high temperature resistance, and the service life is longer than ordinary faucet connectors.
The outer diameter is 10mm. Convenient installation: jpghaha’s copper pipe length design is moderate, the M10/10 mm long male end is connected to the integral faucet. The total length of the hose is 500mm, and the length of the copper tube is 42mm.
It is a must-have good thing for our homes in modern life. Applicable places: 2 flexible hose pipe tap tails for monobloc basin, which can be directly connected to kitchen and bathroom accessories.
High-quality inner tube: the inner tube adopts high-quality EPDM inner tube, which is anti-aging and not easy to corrode. It is more convenient to use with a longer male end. Packing size: 2 pieces of stainless steel flexible tap pipe, the inner diameter of the copper joint is 6. 5mm, which can be used to replace the hot and cold water joints in the bathroom. Suitable for most standard toilets, faucets and single cold faucets.
|Height||2.2 cm (0.87 Inches)|
|Length||50 cm (19.69 Inches)|
|Weight||0.17 kg (0.37 Pounds)|
|Width||0 cm (0 Inches)|
15mm Compression by 3/8" BSP Male Iron Thread European Flexible Tap Adapters PairEmbrass
- Features:Box includes matching crimp sleeves. Ideal for connecting European 3/8" flexi connections. Steel mesh:Nylon coated.
09mm Wall 35mm Bore 2 Metre Self-Seal K-Flex Pipe InsulationK-flex
- Corrosion problems: ph neutral 7±05 en 13468. Fire: euroclasse bl - s2, d0 EN 13501-1. Permeability: μ ≥10000 EN 12086. Thermal conductivity λ w/mk: -20 °c = 0031, 0 °c = 0033, +20 °c = 0035, +40 °c = 0037. Temperature range: -165°c* to +110°C EN 14706.
10M Pack 22mm Pipe x 13mm Thick Foam Pipe Insulation Lagging Wrap RollClimaflex
- 1m lengths. Genuine new climaflex Branded closed-cell Polyethylene Pipe Insulation for pipes. Slit down one side for ease of putting on, highly flexible, dust free, easy install. Non absorbent by water - ok for outdoor usage. Cfc and hcfc free ozone depletion potential of zero.